3.8-7.9 m (13-26 ft)
35.5 cm (14 in)
>300 hp
60-76 cm (24-30 in)
The Wil-Rich SoilPro 513 Disc Ripper from Wil-Rich is engineered to perform in diverse soil conditions, ensuring effective primary tillage. This machine leaves a smooth, uniform surface, ideal for seedbed preparation, benefiting farmers by enhancing crop establishment.
The two rows of parabolic ripper tines on the Wil-Rich SoilPro 513 shatter compaction up to 36 cm (14 in) deep to prommote healthier plants.
The concave discs on the Wil-Rich SoilPro 513 cut and mix residue with soil, promoting fast decomposition.
Compaction limits the ability of water to soak into the soil profile. The SoilPro 513 breaks up compacted layers to improve water infiltration.
The SoilPro is a versatile tool designed to break up compaction layers while thoroughly mixing residue in a variety of soil conditions with ease. It leaves the field ready to retain moisture, break down residue and be easily prepped for planting in the next growing season.
The Wil-Rich SoilPro 513 shatters deep compaction, incorporates residue for faster decomposition, and improves water infiltration. These features lead to healthier plants, better root growth, and higher yields by creating a looser soil profile, reducing plant stress, and ensuring optimal moisture access.
Swipe to read more ⮕
Compaction causes plant stress and leads to lower yields. The two rows of heavy-duty shanks on the Wil-Rich SoilPro 513 can thoroughly shatter compaction across the width of the implement at depths up to 35.5 cm (14 in). This creates a better, looser soil profile for improved root growth, healthier plants, and higher yields.
The Wil-Rich SoilPro 513 increases field efficiency by cutting and incorporating residue as well as shattering compaction. Its large concave discs thoroughly mix large amounts of soil and residue, creating excellent soil-to-residue contact. This helps the residue to break down more quickly ahead of spring planting, so it doesn’t interfere with seed placement or emergence.
The Wil-Rich SoilPro 513 shatters deep compaction to help water soak deeper into the subsoil without restriction. By increasing water infiltration rates, farmers can also experience reduced ponding, waterlogging, and runoff issues. All of these benefits lead to healthier, higher-yielding crops because they have better access to deep moisture with less risk of developing problems from overly saturated soils.
The Wil-Rich SoilPro 513 is equipped with a range of advanced features designed to enhance farming efficiency and productivity. From versatile cutting widths and robust frame construction to efficient residue management and advanced hitch systems, each function of the SoilPro 513 is tailored to meet the diverse needs of modern agriculture. These features work together to ensure optimal soil preparation, improved crop establishment, and long-lasting performance in various soil conditions.
Available in cutting widths ranging from 3.8 to 7.9 m (12.5 ft to 26 ft), the Wil-Rich SoilPro 513 features industry-leading, large-diameter 71 cm (28) in discs disc blades on two-rank individual C-spring disc blade mounting to bury and mix residue for quick decomposition. The 1,588 kg (3,500 lb) trip pressure ripper shanks penetrate even the toughest soil.
The heavy-duty 10 x 20 cm (4 x 8 in) frame adds additional weight to keep the tool in the ground and ripping through even the heaviest residue. This robust construction enhances durability and longevity, making it a reliable choice for intensive farming operations.
The Wil-Rich SoilPro 513 has its shanks arranged in two ranks, spaced 140 cm (55 in) apart. The shanks within each rank are spaced 122 cm (48 in) apart, resulting in an effective spacing of 61 cm (24 in) (76 cm (30 in) for 5-Shank models), promoting excellent crop residue flow, reducing clogging and improving operational efficiency.
Individually mounted C-spring 71 cm (28 in) disc blades have an effective spacing of 48 cm (19 in). This configuration ensures consistent soil penetration and residue mixing, enhancing soil health and crop productivity.
The Wil-Rich SoilPro 513 comes standard with a hydraulic jack. It features a level lift hitch and a fabricated steel Cat. V tongue hitch for a 7 cm (2.75 in) diameter pin, designed to accommodate today's largest horsepower tractors, providing easy attachment and stability, simplifying setup and operation for farmers.
The large concave discs thoroughly mix a large amount of soil and residue, creating excellent soil-to-residue contact.
Disc
Individual disk blades C-spring mounted in a 18-degree angle, with hydraulic depth control. Two blade options: Smooth 71 cm x 0.8 cm (28 in x 5/16 in) blades or SoilRazor 71 cm x 0.8 cm (28 in x 5/16 in) blades with an effective spacing of 48.3 cm (19 in).
Heavy-duty shanks break up deep compaction layers to improve water infiltration and root growth. Multiple tine and point options are available to achieve the desired results in a variety of soil conditions.
3" straight point
Straight Ductile Iron Point (3” wide).
7" wing point
Point 7” Wing Cast.
10" wing point
Wing Ductile Iron Point (3” wide point with 10” wide wings).
Parabolic tine
31.75 mm (1 – ¼ in) high strength abrasion
Resistant steel with chromium
Carbide shin guards
Spring reset tines
Two trip extension springs
Working depth 35.6 cm (14 in) maximum
3,500 lbs max trip pressure
Finishing attachments create a level soil profile, setting the stage for an ideal seedbed in the spring. They also help distribute residue and break up clods.
2-bar coil tine harrow with flat bar rolling basket combination
The 2-bar coil tine harrow with flat bar rolling basket is designed with 30.5 cm (12 in) between tooth bars. A harrow and rolling basket work together to create a desirable field finish. The aggressiveness of the tines is adjustable. The basket has eight blades made of 0.6 x 3.2 cm (0.25 x 1.25 in) steel. The basket is 33 cm (13 in) in diameter. A hydraulic lift option is available for the basket, giving operators the ability to lift the rolling basket when it is not desirable to use it, such as in muddy conditions or when there is a wet spot in the field.
4-bar coil tine harrow
This finishing option is a 4-bar tubular harrow that provides a smooth and level finish when handling tough residue. It features five adjustments for tooth angle, allowing the user to set the harrow’s aggressiveness according to ground conditions and the amount of residue on the soil surface. The tines are 16 mm (5/8 inches) in diameter, 66 cm (26 in) long, and 30.5 cm (12 in) spacing between tines.
| 5-30 SP 513 | 7-24 SP 513 | 9-24 SP 513 | |
| Rigid/Folding | rigid | rigid | rigid |
| Number of shanks | 5 | 7 | 9 |
| Number of blades | 18 | 18 | 24 |
| Shank spacing, cm (in) | 76 (30) | 61 (24) | 61 (24) |
| Working width, m (ft) | 3.81 (12.5) | 4.27 (14) | 5.49 (18) |
| Transport width, m (ft) | 4.94 (16.2) | 4.94 (16.2) | 6.47 (21.25) |
| Transport height, m (ft) | 2.13 (7) | 2.13 (7) | 2.13 (7) |
| Transport length, m (ft) | 10.18 (33.4) | 10.18 (33.4) | 10.18 (33.4) |
| Weight*, kg (lbs) | 7,793 (17,180) | 8,192 (18,061) | 9,590 (21,143) |
| Horsepower requirement | 300-400 | 300-450 | 350-450 |
| 9-24 SP 513 | 11-24 SP 513 | 13-24 SP 513 | |
| Rigid/Folding | folding | folding | folding |
| Number of shanks | 9 | 11 | 13 |
| Number of blades | 24 | 30 | 34 |
| Shank spacing, cm (in) | 61 (24) | 61 (24) | 61 (24) |
| Working width, m (ft) | 5.49 (18) | 6.71 (22) | 7.92 (26) |
| Transport width, m (ft) | 4.8 (15.75) | 5.87 (19.25) | 5.87 (19.25) |
| Transport height, m (ft) | 3.6 (11.8) | 4.18 (13.7) | 5.87 (19.25) |
| Transport length, m (ft) | 10.18 (33.4) | 10.18 (33.4) | 10.18 (33.4) |
| Weight*, kg (lbs) | 10,240 (22,567) | 14,642 (32,280) | 15,281 (33,688) |
| Horsepower requirement | 350-450 | 450-550 | 500+ |
*Approx weight: base weight, no attachments
** Adding harrows to a unit may increase the transport width and/or height of the unit.
| Väderstad has made every attempt to accurately portray our product lineup. However, due to our commitment to continually innovate our technologies to provide our customers the best possible products, some products may not be manufactured as shown on this site. Exact specifications for each product will be confirmed at the time of ordering. |
| LS = Load sensing | FR = Free return | DA = Double acting | ||
| H = Hydraulic | P = Pneumatic | N/A = Not available |
