ISOBUS the virtual terminal

ISOBUS

The virtual terminal

The tractor ISOBUS terminal is able to act as a virtual terminal for the Väderstad machine. This makes it able to take control over tasks such as machine control, troubleshooting and headland automation.

To establish the connection, the gateway on the Väderstad machine and the terminal is connected with an ISOBUS-cable.

ISOBUS terminal as virtual terminal
ISOBUS combined control

Combined control

The ISOBUS terminal can be used in parallel with Väderstad E-Control. For example, the ISOBUS terminal can take control of the seed drill, while E-Control is used to monitor real time seeding data.

The ISOBUS terminal is connected to the gateway on the Väderstad machine with a cable, while E-Control is connected wirelessly.

Match the output rates to the field conditions

Match the output rates to the field conditions

With a variable rate, you are able to manage the output rate for seed and fertiliser. The output is controlled automatically using a field map.

This makes it possible to produce maximum yields on varying soil types.

Minimised overlaps

To eliminate overlaps, the GPS section control automatically turns sections of the seed drill or planter on and off at headlands or at irregular fields shapes.

By minimising overlaps, the system is able to reduce the volume of seed and fertiliser required by up to 10%.

ISOBUS Task Controller compatibility

ISOBUS Task Controller Rapid

Väderstad meets ISO 11783 version 3
Status update: 2018-12-07
Please check in later for updates.

Make Model

Rapid 300-400C/S

 


Gateway SW 1.2.0

Rapid A 400-800S
Rapid A 600-800C/J


Gateway SW 1.3.0

Quick Start
ISOBUS
Task Controller
AgLeader InCommand SW 2.5 SW 3.5 Download
AgLeader Integra SW 7.1.0 SW 7.2.0 Download
Case AFS PRO 700 SW 30.15.2.0 SW 30.15.2.0** Download
CCI CCI 200 SW 5.6* SW 5.6* Download
Claas S10 SW 2.7.22 SW 2.7.22 Download
Fendt Vario Terminal 10.4 782/835* 782/835* Download
John Deere 2630 SW 3.34.1345 SW 3.36.1073** Download
John Deere 4600 SW 10.8.333 SW 10.9.79** Download
New Holland Intelliview IV SW 30.15.2.0 SW 30.15.2.0** Download
TopCon X25/X30/X35 SW 4.00.06 SW 4.02.24 Download
Trimble FMX SW 10.13.101340* SW 10.13.101340** Download
Trimble TMX (PIQ firmware) SW 4.6.1.178 SW 5.60.000.30.4 Download

SW = Software
* Terminal only support one product. Section control for multiple products is possible when using "Master Product" setting.
** Limited operation with SeedEye variable rate.
*** Limited operation with section control. All products shuts off at the same time except with fronthopper FH2200
Quick start task controller instructions for tested terminals. Other ISOBUS terminals may work but they are not tested by Väderstad.
General: Please contact your Väderstad rep for more detailed information.

ISOBUS Task Controller Spirit/Tempo

Väderstad meets ISO 11783 version 3
Status update: 2018-12-07
Please check in later for updates.

Make Model

Spirit R 300S
Spirit 600-900C/S


Gateway SW 1.2.0

Tempo
F, V, T, R, L
FH 2200

Gateway SW 1.2.0

Quick Start
ISOBUS
Task Controller
AgLeader InCommand SW 3.5 SW 3.2*** Download
AgLeader Integra SW 7.2.0 SW 7.2.0*** Download
Case AFS PRO 700 SW 30.15.2.0 SW 30.15.2.0*** Download
CCI CCI 200 SW 5.6* SW 5.6* Download
Claas S10 SW 2.7.22 SW 2.7.22*** Download
Fendt Vario Terminal 10.4 782/835* 782/835* Download
John Deere 2630 SW 3.36.1073 SW 3.36.1073*** Download
John Deere 4600 SW 10.9.79 SW 10.9.79*** Download
New Holland Intelliview IV SW 30.15.2.0 SW 30.15.2.0*** Download
TopCon X25/X30/X35 SW 40.02.24 SW 4.00.06*** Download
Trimble FMX SW 10.13.101340* SW 10.13.101340* Download
Trimble TMX (PIQ firmware) SW 5.60.000.30.4 SW 5.50.000.38.4*** Download

SW = Software
* Terminal only support one product. Section control for multiple products is possible when using "Master Product" setting.
** Limited operation with SeedEye variable rate.
*** Limited operation with section control. All products shuts off at the same time except with front hopper FH 2200
Quick Start task controller instructions for tested terminals. Other ISOBUS terminals may work but they are not tested by Väderstad.
General: Please contact your Väderstad rep for more detailed information.

2 year warranty for Vaderstad machines

Väderstad warranty

Our machine warranty applies for two years from the date of delivery, or for 1000 hectares per metre working width depending on whi…

Service and parts

Service & parts

With a Väderstad service technician, you can relax in the knowledge that your machine is in safe hands and is kept at its very best…

Forklift in warehouse

Search Väderstad

Are you looking for a specific part, trying to find the article number or have you lost your instruction manual and wish to downloa…

Patents owned by Väderstad Holding AB

Patents

Published Patents and Patent Applications in force owned by Väderstad Holding AB. Go here to open or download a full list of patent…