Simplicity is key in the new design
Thanks to its array of front tools and drilling systems, the box seed drill Rapid is always the right choice, irrespective of cropping system. The unique depth control function and coulter pressure result in optimal seed placement even at high driving speeds. Few moving parts and cushioning on all working parts give the machine an extremely long life.
Watch our box seed drill Rapid - The rebirth of a legend
Rapid always right
Drilling directly in stubble, after ploughing or in a reduced tillage system are all possible. Thanks to Rapid’s powerful front tool and soil-cultivating seed discs, it can drill in any conditions. This saves many passes before drilling. The high coulter pressure gives good penetration into the soil.
Rapid can drill everything from small-seeded crops such as grass leys to large-seeded crops such as beans.
Efficient front tool – a cornerstone of the Rapid concept
The box seed drill Rapid with the right front tool makes it possible to achieve the almost impossible.
New hubs leave more time for the field
Rapid has been fitted with new hubs that are greaseless, i.e. pre-lubricated in the factory and with no need for re-lubrication. This reduces the number of grease points. The new bearings also have a longer life. The result is lower operating costs and more time in the field.
From 2015, all Rapid models have hydraulic metering from the tractor. Hydraulic metering is essential in allowing the driver to use Väderstad E-Services, connect the machine to a GPS system and use the new technology to the optimum. With Väderstad E-Services, automatic shut-off can be applied when turning on headlands and the seed rate can also be altered automatically.
New tyres allow lower air pressure
Each wheel presses down the soil over two rows of seed and one of fertiliser. This reconsolidation ensures good contact between soil and seed, and thus good water supply to the germinating seedling. The large wheel diameter of the press wheels, 740 mm, and the new deeper tyre profile make it easier to work in moist conditions. They also decrease the inertia, thus lowering the draught requirement.
The new tubeless tyres allow the air pressure to be lowered to 1.5 bar. This low pressure together with the newly designed tyre pattern increases the contact area on the soil by 50%. The quality of the rubber in the tyres has been improved and the lugs are now higher.
OffSet for greater capacity
OffSet means that alternate wheels in the carrying press wheel unit are displaced 190 mm backwards on a separate axle. This creates a gap between alternate wheels through which soil and crop trash can flow and pass out behind the seed drill. This avoids soil ridging in front of the wheel row.
More flexible following harrow
Rapid C/S is now equipped with a new following harrow that has better lift clearance and adjustable function. A mechanical version and a hydraulically controlled following harrow are available. On the latter, the pressure can be adjusted from the tractor cab on the go. For example, it is possible to work with one pressure in the main field and another on headlands.
Combi secures success
Nutrient placement during drilling gives a fast and reliable fertilisation effect. Since the fertiliser is placed in moist soil, there is less dependence on rain, while placement also gives high yields and better nutrient use efficiency.
Rapid is available with and without fertiliser. Interest in fertiliser placement has increased globally in pace with the higher costs of inputs and increasing environmental awareness. Väderstad can offer many years of experience within this area.
With Väderstad E-Services, Rapid is set for the future
With the introduction of Wi-Fi (Wireless Fidelity) and iPad Air to the Väderstad programme, the machines can be controlled with the help of wireless communication. User-friendliness, cost-effectiveness and ease of update are just some of the major advantages with the iPad Air solution compared with conventional systems. Väderstad’s control solutions have been gathered together under the family name Väderstad E-Services.
Link to E-Services
Save money on irregular fields
Half-machine shut-off on Rapid is now easier, although it is still mechanical. It is possible to activate half-machine shut-off from the side of the machine. It is also possible to decide which side to shut off, so there is no need to plan driving in the field in advance.
On irregular fields there are great opportunities for savings. Farmers who regularly use half-machine shut-off appreciate the fact that they can save up to 5% seed and fertiliser.
Easy to calibrate
Fill the calibration pouch using a practically placed remote control. Weigh the sample and enter the value in E-Control or Control-Station The terminal itself calculates the relationship between seed amount and number of turns of the seed meter. The desired seed rate can then be specified in kg/ha directly in the terminal.
Sow other seed together with the main crop
With BioDrill on Rapid, a ley, catch crop or other small-seeded crop can be precision-drilled at the same time as the main crop. This saves passes, time and money. The seeds are released behind the coulter and are covered by the wheels and the following harrow.