If a powerful cultivator that can operate down to 40 cm is needed, Opus is a good choice. With tines spaced at 27 cm Opus allows very good throughflow. The unique choice of shins and points available means that the cultivator is very adaptable to local conditions. Adjustable reconsolidation with exchangeable packers gives full flexibility, even with varying soil moisture and soil texture.
Watch Opus cultivator in action
Powerful and roomy
Opus is built on a very powerful frame that can withstand stresses, extending the working life. With a tine spacing of 27 cm and a soil clearance of 80 cm, the cultivator can handle large amounts of harvest residues while keeping the draught requirement moderate. Levellers and packers are mounted in rubber cushioning to protect the main frame.
Durable tine solution
The welded tine mountings ensure that the tines maintain their position and eliminate the need for bolt tightening. The tines are fixed to the frame by specially designed bolts with conical bushing, making them maintenance-free.
The tines have hydraulic stone release, which can be set variably up to 700 kg release force. Thanks to this high release force and its soil-seeking points, Opus is able to maintain a constant working depth even on the heaviest soils. Depth control is also influenced positively by the tines springing back more fully on impacts.
MixIn shin mixes the soil effectively
The tines are equipped with a split point and MixIn shin as standard. Ordinary points wear many times faster than the MixIn shin, and therefore it is more cost-effective to have to change only the point. The advantage in cultivation terms is that this design results in a constant mixing action over time.
The MixIn shin throws soil forwards instead of upwards, while also mixing and finely distributing the soil. The point angle is optimised to give as little clod formation as possible. This construction results in very effective cultivation, since soil and harvest residues are mixed several times in the same pass. This leads to very good horizontal distribution of harvest residues.
Works down to 40 cm
The different cultivation possibilities in combination with the range of shins and points available mean that Opus can carry out many different tasks without needing a change of tractor. By using the range of points available to the optimum, it is easy e.g. to cultivate the surface to shallow depth or to work down to 40 cm with the help of DeepLoosening points. If the aim is to improve drainage without mixing the soil, LowDisturbance points are available as a complement to the DeepLoosening points.
It is also possible to achieve complete slicing across the entire working width. By fitting Opus with folding tines and thinning out the tine distribution, it is possible to reduce the draught requirement and avoid the need for a larger tractor.
|Kit for raised tine
Opus is fitted with hydraulically adjustable rotating levellers. These can be adjusted hydraulically as required. Rotating levelling discs are better than cheaper tine solutions on heavy soils. The levelling discs are maintenance-free.
Opus without packer
Flexible choice of packers
For Opus, there are two different models of packer to choose between in order to suit all conditions. The packers can be removed or exchanged, an advantage in different tillage conditions.
SoilRunner is a U-profile packer in which soil acts on soil, leaving an open cultivated surface. Its construction means that SoilRunner does not clog up and when the U-profile is filled with soil the degree of wear is lower. The soil also adds additional weight to the packer, increasing the reconsolidation effect.
SteelRunner is a cultivating steel packer with enormous resistance to wear. It crushes clods efficiently and presses down stones. The deep profile makes it best qualified for medium to heavy soils. The shape results in the roller not only working the surface, but also pressing plant residues into the soil and thus increasing the decomposition rate. Hanging scrapers keep the packer clean even in wet conditions.
Flexible in transport and on headlands
The carrying wheels are positioned in the middle of the machine, which makes Opus easy to transport and gives it a small turning circle on headlands. The wheels are equipped with scrapers, which means that they run free even in difficult conditions. Behind each wheel there is a tine to leave a perfect surface without tracks. Support wheels on the wing sections ensure that the cultivator works to constant depth across the entire working width.