Väderstad Disc cultivator Carrier 1225 in field

Carrier 925-1225

Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per hectare and provides the best start possible for the coming crop.

Learn more about the Carrier concept

Väderstad Carrier 925 clearcut image

Extreme capacity

Carrier 925-1225 is a very robust trailed disc cultivator, available in 9.25 and 12.25m working width. It can be fitted with 450 or 470mm discs. With a high working speed, it has a capacity of up to 16 hectares per hour, resulting in low capital costs per hectare. The wide range of front tools offer versatility to different farming requirements.

Väderstad Carrier with discs according to requirement

Discs according to requirement

Carrier 925-1225 can be fitted with either 450mm or 470mm TrueCut discs. Both discs produces fine tilth optimal for a stale seedbed. The 450mm TrueCut disc has small cut-outs, resulting in an intensive cultivation even at a very shallow working depth. The 470mm TrueCut disc has larger cut-outs which can handle more crop residue with increased penetration.

Väderstad Carrier with straw harro

Straw harrow compensates for poor straw distribution

Large combines tend to have a poor straw distribution, leading to an uneven emergence of the next crop. 

Equipped with the straw harrow Carrier not only cuts, but also distributes straw in the same pass. Well distributed straw is crucial to provide the following crop with the same conditions over the entire field.

CrossCutter Knife adds versatility

By equipping Carrier 925-1225 with the intensive knife roller CrossCutter Knife, crop residues can be cut in two directions.

Weeds and small-seeded crops, such as oilseed rape, profit from an improved germination. A benefit after grain or sunflowers is the intensified chopping of the straw, giving a faster decomposition. Additionally, cover crops can be crushed and incorporated cost efficiently.

Väderstad CrossCutter Knife adds versatility
Väderstad Carrier 1225 the obvious choice for 12m CTF

The obvious choice for 12m CTF

The large Carrier 1225 has a working width of 12.25m, this gives a slight overlap required in a 12m CTF-system. Thanks to the x-disc layout, the machine will always run dead straight behind the tractor. This is essential when using GPS-control or when cultivating in hilly terrain.

Väderstad Carrier offers great capacity on ploughed land

Great capacity on ploughed land

Equipped with a crushing and levelling CrossBoard, Carrier 925 is able to turn any ploughed land into a seedbed in one pass. Its high speed and wide working width offer an outstanding capacity in this segment.

The double acting stabilising bar attached to the CrossBoard improves levelling further.

Easy and safe to transport

Carrier 925-1225 has the unique Väderstad folding system, giving a fast transition from field to transport. The folding technique has been designed to give the machine a low centre of gravity, resulting in safe manoeuvring.

When folded the transport width is 3m. 

Väderstad Carrier easy to transport
Väderstad Carrier even weight distribution

Even weight – even result

Carrier 925-1225 is equipped with weight packages in the wing sections. This ensures the weight is evenly distributed across the entire working width without the need for complex hydraulic solutions.

Väderstad Carrier Heavy-duty frame equals long working life

Heavy duty frame – long working life

Carrier 925-1225 has an extremely robust frame, ensuring a long working life even in the toughest of conditions. Its few greasing points reduces the maintenance required leading to more time in field.

BioDrill turns Carrier into a seed drill

Equipped with the mountable small seeder BioDrill 360, Carrier 925-1225 becomes a precise seed drill allowing fast establishment of small-seeded crops, such as oilseed rape and cover crops.

The integrated ground radar provides perfect speed detection. Additionally, the high fan capacity ensures an equal distribution over the entire working width, irrespective of seed size.

BioDrill results in reduced operating costs and time saved.

Väderstad Carrier with BioDrill

Product concept

Zone 1 - Front tools

Whether you require a stale seedbed, levelling of ploughed land or cover crop incorporation, the optional front tools offer versatility to different farming requirements.

Straw harrow

CrossCutter Knife

Zone 2 - Intensive cutting and mixing

Two rows of high quality V-55 hardened Swedish steel discs aggressively cuts and mixes harvest residues down to 12cm working depth. The conical shape of the discs ensures a long working life and good crumbling of the soil.

450mm discs

TrueCut 470mm discs

CrossBoard Heavy

Zone 3 - Reconsolidation

Carrier can be equipped with packers suitable for a wide range of field conditions. The rubber suspension on the packer absorbs shocks and extends the working life of the frame and the packer.

Single SteelRunner

Double SoilRunner

Technical data

Carrier 925 1225
Effective working width (m) 8,94 11,94
Packer width (m) 9,25 12,25
Transport width (m) 3,0 3,0
Transport height (m) 4,0 4,0
Weight with SteelRunner (kg) 10000 11700
Weight with Single SoilRunner (kg) 8500 9500
Number of discs 72 98
Disc spacing (cm) 25 25
Disc angle 16 16
Brakes H/P H/P
Recommended working speed (km/h) 10-14 10-14
Wheel dimension (transport wheels)  400/60x15.5 400/60x15.5
Hydraulic requirements (DA) 3 2-3
Draught requirements from (hp) 300 400
Väderstad has made every attempt to accurately portray our product lineup. However, due to our commitment to continually innovate our technologies to provide our customers the best possible products, some products may not be manufactured as shown on this site. Exact specifications for each product will be confirmed at the time of ordering.
 
LS = Load sensing    FR = Free return    DA = Double acting 
H = Hydraulic    P = Pneumatic     

Aftermarket accessories

Accessories Carrier

We offer many ways to accessorise and enhance your Carrier machine. This is also true for already owned equipment.

Learn more

Download brochures and manuals here

2 year warranty for Vaderstad machines

2 year warranty

Our machine warranty applies for two years from the date of delivery, or for 1000 hectares per metre working width depending on whi…

Service and parts

Service & parts

With a Väderstad service technician, you can relax in the knowledge that your machine is in safe hands and is kept at its very best…

Forklift in warehouse

Search Väderstad

Are you looking for a specific part, trying to find the article number or have you lost your instruction manual and wish to downloa…

Patents owned by Väderstad Holding AB

Patents

Published Patents and Patent Applications in force owned by Väderstad Holding AB. Go here to open or download a full list of patent…